Wire Mesh

Specifications Required Upon Ordering：

  1. Material    
  2. Wave
  3. Diameter（d）
  4. Aperture (a) is the distance between two parallel wires (in millimeter). a = p - d =(25.4㎜ ÷ m) - d;
    Mesh Count (m) is the number of mesh holes within one inch.　m = 25.4㎜ ÷ p ;
    Pitch (p) is the distance the centers of two adjacent wires (in millimeter).　p = a + d.
  5. Width & length
  6. Quantity
  7. Edge Treatment (only chain link weave, conveyor belt, vibrating screen, filter with frame and demister need to be specified.) 

Related Specification Information:

Square mesh opening ratio (o) ; o = ( a ÷ p )2 x 100%