[ ESZ > Products & Services > Mist Eliminator ]

Mist eliminator is made of knitted wire mesh. When muddy air pass through a mist eliminator, small liquid particles floating in the air will stick to the mist eliminator. These meshes are usually being tightly packed stack. The pleated shape can increase the surface area, allowing for a larger contact space while keeping the weight of the mist eliminator light. It is mostly used in purifying petroleum, crystalizing, stink removal, dust collecting, as well as in gas and chemical industry equipments.

Type	Density	Space Ratio	Surface Area	Brands Comparison
Unit	KG/M³	%	M²/M³	York	Metex	Knitmesh
M80	80	99	158	931	Hi-Thruput	4540
M144	144	98.2	280	431	Nu-Standard	9030
M192	192	97.5	375	421	Xtra-Dense	9033
H220	220	97.2	910	-	-	-
H432	432	94.5	1780	333	Multi-Strand	-
P64	64	97	410	221	-	-

Type	Character & Application
M80	In all types of mist eliminator, M80 has the highest air passing speed. It is usually used when low pressure loss is needed, no clogging is allowed or whenever a low high air processing volume environment is necessary. the thickness of the mist eliminator is around 150 mm. To achieve the same mist capturing effect as with the M192 (see third item of this table), the thickness should be set to 200 mm.
M144	Suitable for processing 5~8μ mist particles at the speed of 1~5 M/Sec with the efficiency ratio 95%~99%.
M192	Used when high efficiency ebvironment is required. Although its higher density can cause the bigger pressure loss, it is still capable of processing 3μ mist particles at the speed of 1~6 M/Sec with the efficiency ratio 95%~98%.
H220	To remove the 1~3μ mist particles, especially when the mist density is lower than 1.0 mg/M³. This thickness of H220 is usually at 200~300 mm.
H432	Specialized in capturing 0.8~1μ mist particles, H432 has a higher capturing efficiency than H220. It is the most efficient demister but its pressure loss is higher than the other types.